Extracto
Table of Contents
1 Introduction
1.1 General description of Topics
1.2 Participants, locations and dates
1.3 General description of methods and tools
2 Construction of groundwater table map
2.1 Background
2.2 Methodology
2.3 Results
2.4 Discussion
3 Stream discharge measurements
3.1 Background
3.2 Methodology
3.2.1 Float method
3.2.2 Flow meter method
3.2.3 Tracer method
3.3 Results
3.4 Discussion
4 Pumping test
4.1 Background
4.2 Methodology
4.2.1 Methodology for automatic measurements & pumping phase
4.2.2 Methodology for automatic measurements & recovery phase
4.2.3 Methodology for manual measurements & pumping phase
4.2.4 Methodology for manual measurements & recovery phase
4.2.5 Methodology for storativity S
4.3 Results
4.3.1 Results for automatic measurements & pumping phase
4.3.2 Results for automatic measurements & recovery phase
4.3.3 Results for manual measurements & pumping phase
4.3.4 Results for manual measurements & recovery phase
4.4 Discussion
5. Surface- and groundwater sampling
5.1 Background
5.2 Methodology
5.2.1 Multimeter measurements
5.2.2 Titration for alkalinity
5.2.3 Investigations in the lab
5.3 Results
5.3.1 Field results
5.3.2 Lab results
5.4 Discussion
5.4.1 Discussion of field results
5.4.2 Discussion of lab results
6 References
7 Table Of Figures
8 Appendix
8.1 GNU plot program for Topic 1 “Level_b.plt”
8.2 GNU plot Input for Topic 1 'Leveling_d.csv'
8.3 GNU plot program for Topic 1 “Thickness_b.plt”
8.4 Maxima program for Topic 1 “well_a.wxmx”
8.5 GNU plot prog. topic 3 pumping “pump_log.plt”
8.6 GNU plot input topic 3 pumping “PumpLogger0Group1.csv”
8.7 GNU plot input topic 3 pumping “PumpLogger0recov.csv”
8.8 GNU plot progr. topic 3 fitting only “pump_log_fit.plt”
- Citar trabajo
- Dipl.-Ing. Rainer Stickdorn (Autor), 2016, Hydrogeological Field Methods. Discharge, Pumping Test and Water Analysis, Múnich, GRIN Verlag, https://www.grin.com/document/433463
Textos similares
Así es como funciona
Comentarios